sal t
technical product info
-
hand-set tiles. do not use mallets or excessive force. maintain 1/16” - 1/8” grout joint between tiles using tile spacers. install flexible joints per tcna standards wherever expansion and control exists in substrate and no more than 15ft apart regardless of substrate. use leave in spacers when installing on wall. install flexible joint at all perimeter walls. exterior applications will require flashing to prevent moisture seepage behind tile. 7. grout grout tiles using laticrete permacolor sanded grout. grout joints are a direct function of ansi minimums for uncalibrated natural stone tiles specific to installation pattern and natural warpage to reduce floor lippage. grout joint should be at least 0.5% of the longest edge. tiles can be pre-sealed with an impregnating sealer to aid in grout release. float the whole tile surface, not just the grout joints. follow grout manufacturer’s recommendations. 8. care + maintenance caring for your cement zellige tile is a relatively simple process to incorporate into your maintenance routine. additional steps can be implemented down the road as needed to maintain the tiles and much like a natural stone your floor can be rejuvenated with an abrasive wet-scrub and seal; our concrete tiles are made of naturally occurring raw materials and a such patina is expected with age. clean-up spills immediately avoids liquids to standing on tile surface for long periods of time.
routinely clean tile with clean water, mop or soft cloth/sponge and ph neutral cleaner. do not use harsh acidic chemicals or alkaline products. if any stains occur, use hot water and ph natural soap and water. employ scrubbing sponge to assist. oil stains may require the use of poultice to draw out the stain. applying cc conditioner to backsplashes exposed to heavy liquids, can help with maintenance. tiles are expected to patina over time due to natural wear. sealer may require stripping and reapplication overtime following sealer manufacturer’s instructions combined with sealer application instructions outlined above. 9. routine care clean walls daily. use warm clean water and ph neutral (non-acidic) detergent. for walls apply concrete conditioner as needed. frequency of maintenance depends on traffic and use. wipe up spills immediately. give immediate attention to acidic liquids like lemon juice. follow sealer manufacturer’s recommendations. 10. future rejuvenation periodically a deeper clean can rejuvenate appearance and add protection. ensure tile is cleaned and free of all dust and debris. if you have any questions please contact our technical team: tech@concrete-collaborative.com
-
-
-
-
-
-
-
- -
-
-
- -
-
- - - - - - -
-
-
-
-
-
-
-
-
855.268.0800 | concrete-collaborative.com | sales@concrete-collaborative.com
Powered by FlippingBook