st rands
technical product info
-
-
maintain 1/16” - 1/8” grout joint between tiles using tile spacers. install flexible joints per tcna standards wherever expansion and control exists in substrate and no more than 15ft apart regardless of substrate. use leave in spacers when installing on wall. install flexible joint at all perimeter walls. exterior applications will require flashing to prevent moisture seepage behind tile. 7. preseal in preparation for preseal, ensure tiles are dry and free of dust apply 2 coats of prosoco polishguard by wiping on evenly in a very light coat with a prosoco polishguard soaked microfiber towel by hand. allow each coat of polishguard to be dry-to- the-touch before repeating the next thin coat. wipe off any excess sealer to maintain a natural looking finish but not too glossy. wait 1 day after sealing to grout 8. grout grout tiles using laticrete permacolor non-sanded grout. grout joints are a direct function of ansi minimums for uncalibrated natural stone tiles specific to installation pattern and natural warpage to reduce floor lippage. maintain 1/16” - 1/8” grout joint between tiles using tile spacers. float the whole tile surface, not just the grout joints. be diligent in removing any adhesive or grout from surface before drying. follow grout manufacturer’s recommendations. -
waterproofing membrane should be employed on slab on grade or where moisture is present. consult adhesive manufacture. follow all adhesive manufacturer preparation instructions. walls and framed floors require cement board substrate for proper adhesion. follow all adhesive manufacturer preparation instructions. walls and framed floors require cement board substrate for proper adhesion. 5. installation materials adhesive: laticrete 254 platinum rapid. use laticrete latapoxy 300 on a steel substrate. grout: laticrete permacolor non-sanded grout. sealer interior: prosoco polishguard. sealer exterior: prosoco slx. 6. installation as it is a finished surface, tile should be installed as late in the project as possible. blend tiles from different boxes to ensure desired pattern, layout and color variation is achieved. preseal tile prior to installation using polishguard prior to installation and grout back-butter tile with 1/4” notched trowel ensuring 95% coverage with manufacturer recommended adhesive. hand-set tiles. do not use mallets or excessive force.
-
-
- -
-
-
-
-
-
-
-
-
- -
-
-
-
-
-
-
-
-
-
-
-
855.268.0800 | concrete-collaborative.com | sales@concrete-collaborative.com
Powered by FlippingBook