paci f ica
technical product info
technical summary
compressive
>8000psi
ibc flame spread
rating a (0-25ft/hr.)
freeze thaw
meets standards astm c936/c1645 1 1/4” = 15 lbs/sf or 30mm + 75 kg/m 2
weight (lb/sq.ft) colorfastness
uv stable
curvature tolerance
1/8” over 8’ span
slabs are hand cast and not fully gauged. thickness can vary, typically +/-1/16” recommended. made to order material, order additional slabs expected. select and seam slabs like stone or any other material with variation
thickness tolerance
overage
tonal variation
installation
storage
indoor, covered and braced on a-frame
slabs need to be fully supported. use 3/4” plywood fixed to cabinets/steel/block substrate. plywood to span no more than 24” between cabinets and supports max 6” on unsupported sections of overhang fully bond using laticrete 254pr adhesive or silicone/pl construction adhesive mitre. cut edges should be polished and epoxy filled ensure back-rodding for sink rails or cutout locations
substrate
overhang
adhesion
edges
cut-outs
seams
seam with flexible caulk or epoxy
apply pre-seal cc hard. apply finish-seal 3 coats prosoco polishguard apply cc conditioner. wipe up spills + spot clean - acids can etch
seal
maintain
855.268.0800 | concrete-collaborative.com | sales@concrete-collaborative.com
Powered by FlippingBook